The protection of the faucet is very important. If you find a low-quality faucet, the quality of use cannot be guaranteed, and you need to repair it repeatedly. If you don't know how to unscrew it during maintenance, you can look at how to screw the faucet without a wrench and the use of the faucet, and find the skills and methods for disassembling the faucet. It will be more convenient for maintenance and can reduce the use of various problems.

 

 

How to turn a faucet without a wrench

 

Separate the water inlet and hose, separate the faucet and basin, and cut off the joint with a saw.

 

1. Separate the water inlet pipe and the hose

 

The water inlet pipe of the bathroom is an open pipe, which can be shaken by hand. When disassembling, it is afraid that it will break accidentally. So when disassembling, be very careful, hold the water pipe with your left hand, twist the wrench with your right hand, and easily separate the two.

 

2. Separate faucet and basin

 

Remove the faucet fixings so that the faucet can be removed from the basin. But then there is a problem. The hose of the faucet has been used for a long time, so the hose has become brittle, and the fixing part has been rusted, and it cannot be unscrewed with a wrench.

 

3. Use a saw to cut off the interface

 

Due to the small space under the basin, it is difficult to operate. Moreover, the glass glue between the basin and the countertop has been worn out for a long time, so the basin can be easily removed from the countertop. After the basin is removed, the construction will not get in the way. Then use a saw to cut off the rusted part that is difficult to remove, and the faucet is successfully removed.

 

 

Faucet usage matters

 

1. Various impurities in the pipeline should be completely removed during installation. Spool damage, jamming, clogging and leakage are avoided. At the same time, the surface should be cleaned so that no residues of building materials remain.

 

2. For any kind of faucet products, it is not necessary to use excessive force when switching on and off, just gently twist or toggle. Even a traditional faucet doesn't need to be screwed hard. In particular, do not use the handle as an armrest for support or use. Products equipped with a screen cover for the water outlet should be disassembled and rinsed to remove impurities after a period of use. Products equipped with a hose should pay attention to keep the hose in a natural stretch often so as not to break.

 

3. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretching state, and do not coil it on the faucet when not in use. At the same time, when in use or not, be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose.

 

4. The faucet that has been used for a short time sometimes also has phenomena such as incomplete closing, leakage, loose handle, loose connection port and water leakage. Under normal circumstances, consumers can solve it by themselves.

 

The above introduction is how to screw the faucet without a wrench and the use of the faucet. You can take a look at the precautions for the use of various faucets, and then adjust them according to the situation of home use. When using the faucet, because there are a variety of impurities, be prepared to clean it. When choosing, it is still necessary to find some waterproof materials as much as possible to avoid rusting in the future.